A room can look and feel dry to the touch while moisture meters still show trapped moisture inside wall cavities or under flooring.
We calculate air mover and dehumidifier placement using psychrometric formulas, not a flat per-room equipment count.
We calculate drying requirements using temperature and humidity data, not a flat per-room rule.
Our Lithonia, GA jobs run commercial LGR equipment sized to the calculated moisture load.
Thermal scans on every Lithonia, GA job catch moisture a visual inspection alone would miss.
Daily logs give you and your insurer verifiable proof of progress, not a technician's word.
Below is the calculated, documented process our Lithonia, GA teams follow.
The assessment sets the baseline every later reading gets measured against.
Thermal imaging often reveals moisture has traveled further than the visible damage suggested.
Dehumidifier capacity is matched to the calculated moisture load for that specific space.
Documented logs track the numbers from day one through final verification.
Specialty drying protocols protect materials that standard drying speed could damage.
Final verification compares closing readings against the material-specific dry standard, not a general guess.
A quick call helps us determine whether thermal imaging and full drying equipment are needed.
Equipment for psychrometric assessment is standard on every drying dispatch.
You'll see the calculated plan and cost before drying equipment goes down.
We verify final moisture readings against dry standard before removing equipment.
"The thermal imaging found moisture behind a wall that looked completely fine from the outside. Would have missed it otherwise." — Julian R.
"They came back every single day to take readings and showed me the numbers improving. Felt like real science, not guesswork." — Monique T.
"Our hardwood floor didn't warp because they slowed the drying process down specifically for it." — Grant P.
We rely on moisture meters and thermal imaging, not appearance alone.
It's a calculated approach using temperature and humidity data to determine exact equipment needs, rather than guessing.
Typical drying time is 3-5 days for standard materials, longer for sensitive ones like hardwood.
You'll see the actual numbers improve each day through documented logs.
Specialty drying protocols protect hardwood and cabinetry from the damage a standard drying speed could cause.
A stall in the daily logs triggers a plan review rather than simply leaving equipment running unchanged.
Lithonia is within our core structural drying response zone.
Speak directly with our structural drying team.
Call +1-844-833-1325